文章 ID : 00156186 / 最後修改 : 11/04/2018

BRAVIA 電視並未出現在螢幕鏡射或 Wi-Fi Direct 相容裝置的螢幕上。

本文的適用產品及分類

Check the following if BRAVIA is not displayed on the screen of your device that is compatible with either Screen Mirroring feature or Wi-Fi Direct feature:

For devices that are compatible with Screen mirroring
Please make sure that the input of the TV is set to Screen Mirroring .

For devices that are compatible with Wi-Fi Direct

  • For 2014 models:
    Please make sure that Built-in Wi-Fi and Wi-Fi Direct settings are set to On. These settings can be changed from the menu of the TV.

  • For Android TV:
    Please check Wi-Fi Direct is set to On by following:
    1. Press the Home button on remote control and select Settings.
    2. Select Network in the NETWORK & ACCESSORIES category.
    3. Select Wi-Fi Direct
    4. Select On.

      After checking, please select Wi-Fi Direct Settings.


If the steps above did not resolve the issue, follow the steps below:

  • For 2014 models:
    1. Make sure the TV and wireless router (access point) are not connected using a 12 or 13 channel frequency. If the wireless channel are set to that frequency, BRAVIA will not appear on the compatible devices.

      NOTE: Contact your Internet Service Provider (ISP) for assistance with verifying this setting.

    2. Change the wireless channel frequency of your wireless router between 1 ch and 11 ch.

      NOTE: Refer to the manual of your wireless router for detailed information regarding how to change the wireless channel frequency.
  • For Android TV:
    If the TV is connected to the network by wired LAN, please change the connecting channel by following:
    1. Press the Home button on remote control and select Settings
    2. Select Network in the NETWORK & ACCESSORIES category.
    3. Select Wi-Fi Direct
    4. Select Advanced settings
    5. Select Band setting
    6. Select Manual.
    7. Select a Channel.