適用型號

此資訊適用於以下型號:
  • BDP-S4500
  • BDP-S5500

關於此下載

此程式僅適用於在亞太地區銷售之商品,並非所有國家皆銷售所有商品
此程式更新 BDP-S4500/S5500 韌體至版本 M25.R.0221 並提供下述優點

  • 改善網路服務至穩定性
亦包含前更新所提供之優點
  • 改善網路服務之連接性
  • 改善資料影片之播放能力
  • 修正特定 FLAC 檔案之播放問題

檢視目前韌體版本

  1. 開啟電視機電源、並確認調整至藍光光碟播放機所連接的輸入端
  2. 開啟藍光光碟播放機電源
  3. 若播放機開始播放光碟,請按 STOP 鍵,並靜候電視機上顯示主畫面後再執行
  4. 使用遙控器上之方向鍵選擇設定 (Setup) – 系動設定 (System Settings),然後再按 ENTER 鍵
  5. 使用方向鍵選擇系統資訊 (System Information) 並按 ENTER 鍵
  6. 電視畫面上會顯示藍光光碟播放機所安裝之韌體版本
    若版本編號後四碼為 0221 或更高,則無需安裝此韌體更新

如何取得韌體更新
執行 BDP-S4500/S5500 韌體更新之方式如下

網路更新

  • 網路更新操作非常簡單,建議您使用此方式更新
  • 您須使用乙太網路線、或無線連接,將藍光光碟播放機連接至網際網路
  • 建議您使用 512Kbps 以上之網路速度執行網路更新
  • 更多資訊,請參考網路更新說明

USB 更新

網路更新說明
網路更新方式非常簡單,建議您使用此方式更新 BDP-S4500/S5500 韌體

重要說明

  • 警告!請依照更新說明操作。未依照說明操作可能中斷更新步驟、且可能使藍光光碟播放機無回應或者需要維修
  • 警告!請勿關閉藍光光碟播放機或中斷 AC 電源連接。安裝韌體時,電源中斷可能使煩光光碟播放機無回應或者需要維
  • 使用此方式更新,務必將播放機正確地連接至有效的網際網路
  • 為執行韌體更新,須將系統正確連接至相容的電視機

網路更新說明:
說明:韌體更新步驟一般花費 15 至 30 分鐘,速度依據系統組態及網路連線而定。

  1. 開啟電視機電源、並確認調整至藍光光碟播放機所連接的輸入端。
  2. 使用乙太網路線或無線路由器,連接藍光光碟播放機至網際網路來源。
  3. 開啟藍光光碟播放機電源。
  4. 若藍光光碟播放機內有光碟,請移除光碟。
  5. 在主選單目錄上,使用遙控器上之方向鍵選擇設定 (Setup) -軟體更新 (Software Update),然後選擇網路更新 (Update via Internet)。
  6. 將顯示新軟體版本適用之訊息。請選擇 OK 以執行網路更新 (Update via Internet)。
  7. 將顯示更新至新軟體版本 (Update to a new software version) 訊息,電視機上將顯示最新軟體版本。
  8. 選擇開始 (Start) 然後按 ENTER 鍵。
  9. 開始更新步驟第一階段。
  10. 更新時,電視上將顯示進度列 x % 及下載容量。
    說明:x 將由 0 變更至 100,表示更新進度。
  11. 完成時,藍光光碟播放機將自動重新啟動;並開始更新步驟第二階段。
  12. 更新時,電視上將顯示進度列 x % 及下載容量。
    說明:x 將由 0 變更至 100,表示更新進度。
  13. 韌體更新完成時,將自動關機、並重新啟動。
    警告!更新完成前,請勿操作、或關閉電源。否則可能使藍光光碟播放機無回應或者需要維修。
  14. 檢視目前韌體版本以確認更新是否成功安裝。
    說明:若版本編號後四碼為 0221,則韌體更新成功。
    若有任何問題、或需要協助,請聯絡 Sony

網路更新常見問題:

  1. 執行網路更新時,電視機顯示訊息:無法確認連線狀態、或此裝置為連接至網際網路且您無法執行韌體更新。
    網路連線可能有問題,請確認網路連線及設定是否正確:
    1. 有線連線,檢視乙太網路線正確連接至裝置之 LAN (100) 終端及網路來源。
    2. 無線連線,確認開啟無線網路路由器電源,並連接至網路來源。
    3. 檢視藍光光碟播放機網路設定、並確認播放機有其 IP 位址。
    說明:若您使用 proxy 伺服器,請於 Proxy Server 輸入欄中輸入您使用 proxy 伺服器之 IP 位址,而非代理伺服器名稱。
    4. 確認網路設定 (Network Settings) - 網路連線狀態 (Network Connection Status) 內之連線及網路存取皆為 OK。 
    5. 再次依照網路更新操作。
  2. 更新時,請勿關閉電源。
    開啟藍光光碟播放機電源、並再次執行更新步驟。
  3. 執行 30 分鐘後韌體更新步驟仍未結束。
    執行網路更新所建議之網路速度為 512Kbps 或以上。
    若韌體更新步驟仍未完成,請取消步驟、並嘗試使用 USB 更新。若韌體更新失敗,請聯絡 Sony
  4. 更新韌體時,顯示更新失敗畫面。
    請執行以下步驟:
    1. 確認網路連線無錯誤。
    2. 在更新失敗畫面上,選擇 OK 並再次執行網路更新,或選擇取消以取消網路更新步驟。
    3. 若再次嘗試網路更新後仍未改善,請自網頁下載韌體並使用 USB 更新。
    4. 取消網路更新步驟、並執行 USB 更新。
  5. 數次嘗試後,韌體更新仍舊失敗。
    請自網頁下載韌體並使用 USB 更新。
    若問題仍然存在,請聯絡 Sony

檔案資訊

檔案名稱

  • UPDATE_M25R0221.ZIP

檔案版本

  • M25.R.0221

檔案大小

  • 124.0MB

日期

  • 2017-02-02

系統需求

  • System OS

安裝

詳細資訊

Download for Update via USB Memory Instructions
If you cannot connect the BDP-S4500/S5500 to your Internet source, please use the update via USB method.

Important Notes:

  • If you have not done so already, please check the current firmware version to determine if this firmware update is needed for your Blu-ray Disc player.
  • WARNING!! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair
  • WARNING!! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair.
  • Recommended operating system for the computer that will download the firmware update:
    • Macintosh OS version 10.5 or later version
    • Microsoft Windows 10, Windows 8.1,Windows 8, Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows XP
  • In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download for Update via USB Memory Instructions

  1. Download the UPDATE_M25R0221.ZIP file to a temporary or download directory (please note this directory for reference).
  2. Go to the directory where the file was downloaded and verify that the size of the UPDATE_M25R0221.ZIP file is 130,359,793 bytes.
    a. Right-click theUPDATE_M25R0221.ZIP file, and click Properties.
    b. On the UPDATE_M25R0221.ZIP Properties screen, verify that the Size: listed is 124 MB (130,359,793 bytes).
    Note: The Size on disk: listed may be different. That is normal.
    c. If the file size is different than the 130,359,793 bytes, please download the UPDATE_M25R0221.ZIP file again.
  3. Extract the update file from the UPDATE_M25R0221.ZIP file.
  • For Mac OS X operating system:
    a. Go to the location where the file was downloaded and double-click the UPDATE_M25R0221.ZIP file.
    b. A new folder will be created called "UPDATE "
  • For Microsoft Windows Vista, Windows 7, Windows 8, Windows 8.1 or Windows 10 operating system:
    a. Go to the directory where the file was downloaded and right-click the UPDATE_M25R0221.ZIP file, and then click Extract All
    b. At the Extract Compressed (Zipped) Folders window, click Extract
    c. A new folder will be created called UPDATE
  • For Windows XP operating system:
    a. Go to the directory where the file was downloaded and right-click the UPDATE_M25R0221.ZIP file, and then click Extract All
    b. At the Extraction Wizard dialog box, click Next.
    c. Click Next.
    d. Click Finish.
    e. A new folder will be created called UPDATE

    Note: Make sure all four files is included inside UPDATE folder: 
    MSB25FW.BIN and MSB25-FW.ID, MSB25-FW_MB.BIN, and MSB25-FW_MB.ID
  1. Connect a compatible USB storage device to your computer.
    View formatting instructions and the list of compatible USB storage devices
    Note: BDP support FAT32 and NTFS
  2. Transfer the update folder to the USB storage device:
  • For Mac OS X operating system:
    a. Drag and drop UPDATE folder to the root folder of the USB device.
  • For Windows operating system:
    a. Go to the directory where the folder was created
    b. Right-click the UPDATE folder and, from the menu
    c. Click "Send To...", and then click the drive (Example: Removable Disk E:) that represents your USB device.
    d. The update folder will be copied onto your USB device.

    Note: The update will not be performed if the file is not copied to the root directory of the USB device or if the name of the file is modified.
  1. Remove the USB device from your computer.
  2. Please continue to the next section.

Update via USB Instructions
The instructions below are for how to install the firmware update using a USB device.

Firmware update Instructions

  • WARNING!! Do not power off the player or disconnect it from the AC power outlet. Doing so may damage the player to the point of requiring repair.
  • WARNING!! Do not press any buttons, except as instructed, until the update is complete. Doing so may damage the player to the point of requiring repair.
    Note:The firmware update process takes up to 5 minutes to complete. During the update process, the screen on your television will display progress information, or may be blank. This is normal. 
  1. Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.
  2. Power on the Blu-ray Disc player.
  3. Make sure no other USB devices are connected to Blu-ray Disc player, if there are, please unplug it from Blu-ray Disc Player.
  4. Insert the USB storage device containing the update file into USB port located on the front panel of the player.
  5. At the Home Screen menu, use the arrow keys on the remote control to select Setup - Software Update and then press the ENTER button.
  6. Software Update confirmation will be displayed. Select Update via USB Memory. Press OK to perform Update via USB Memory.
  7. The message Update to a new software version is prompted and the latest software version is displayed on the television
  8. Select OK and then press the ENTER button
  9. The first portion of the update process starts.
  10. During the update the progress bar “x %” is displayed on the television.
    Note: The “x” changes to “0” through “100”, indicating the update progress
  11. The Blu-ray Disc player will restart itself when the first portion has completed and the second portion of the update will start.
  12. The progress bar "x %" is displayed again on the television.
    Note: The “x” changes to “0” through “100”, indicating the update progress
  13. Once the firmware update is complete, the player will power off and power back on automatically.
    WARNING!! Do not operate or power off the player until the update is complete. Doing so may result in your player being unresponsive and requiring repair.
  14. Remove the USB device from the player.
  15. Check the current firmware version to confirm that the update has successfully installed.
    Note: If the last four digits of the version number are 0221, the firmware update was successful.

Update via USB Memory FAQ

  1. Unable to select “Update via USB Memory”.
    Please make sure following:-
    -USB device is properly connected to Blu-ray Disc player.
    -USB device is formatted to supported File System (FAT32 & NTFS).
    -USB devices is compatible with Blu-ray Disc player.
    If the problem continues, please contact Sony.
  2. Caution message “There is no update file” is displayed.
    Please make sure the update folder name is correctly named (UPDATE – with all capital letter) and all the files are included inside UPDATE folder:-
    -MSBXX-FW.BIN
    -MSBXX-FW.ID
    -MSBXX-FW_MB.BIN
    -MSBXX-FW_MB.ID
    Please follow the steps in the Download and Transfer the Update File to your USB Storage Device section.
    If the problem continues, please contact Sony.
  3. Caution message “The file is corrupted” is displayed.
    Please download the UPDATE_M25R0221.ZIP again and follow the steps in the Download and Transfer the Update File to your USB Storage Device section.
    If the problem continues, please contact Sony
  4. The power was shut down during the update process.
    Power on the Blu-ray Disc player and try the update process again.
  5. The UPDATE_M25R0221.ZIP update file I downloaded from the update web site cannot be extracted.
    The download may have failed. Delete the downloaded file and follow the steps in the Download and Transfer the Update File to your USB Storage Device section.
  6. The firmware update process is still not finished after running for more than 30 minutes.
    Please contact Sony.