Sony 支援

Firmware Update For WX-800UI

    適用型號
    關於此下載
    檔案資訊
    系統需求
    安裝

    適用型號

    此資訊適用於以下型號:
    • WX-800UI

    關於此下載

    This page provides instructions on how to update the firmware for WX-800UI to version 12.

    Benefits of Update:

    • Resolves symptom where in rare cases, the audio unit will reset.

    This firmware update also include previous update benefits and improvements:

    • Resolves symptom where in rare cases, the audio unit will not start when the car engine is turned on.

      Note:
      If the unit does not start when the engine is started and the issue cannot be solved by pushing the reset button on the main unit, please perform the following steps.

      1. Turn your car engine Off.
      2. Disconnect the connection between the main unit and the battery on your car once and after waiting a few minutes, re-connect the connection between the main unit and the battery on your car.
      3. Turn your car engine On. And confirm the main unit starts up.
      4. Update the firmware of the product.

    Applicable Models

    WX-800UI

    How to confirm the Model and the Firmware version

    Please confirm the Model and the Firmware version from the steps below.

    1. Turn the main unit ON.
    2. Press and hold SOURCE button for 1 second on the main unit to turn the source off and display the clock.
    3. Press MENU button.
    4. Turn the control dial to display SET GENERAL, and press the control dial.
    5. Turn the control dial to display SET FIRMWARE, and press the control dial
    6. Turn the control dial to display FW VERSION, and press the control dial.
    7. If the version is displayed as 12, you do not need to update the firmware.

    檔案資訊

    檔案名稱

    • WX-8xx_v1200.zip

    檔案版本

    • 12

    檔案大小

    • 3.1MB

    日期

    • 2016-06-23

    系統需求

    • System OS

    安裝

    詳細資訊

    How to update the firmware:

    1. Preparation:
      How to store the updater file into an USB memory
      • Connect the USB memory to your PC and format the USB memory with the format type, FAT16 or FAT32.
      • Connect your PC to the internet.
      • Download the compress zip file into your PC.
      • Uncompress the zip file and copy the update file WX-8xx_v1200.dat under the root of the USB memory which is connected to your PC.
      • Disconnect the USB memory from your PC.
    2. Updating the firmware of the main unit with the USB Memory
      Note:
      • Please make sure to follow all steps as below.
      • Update procedure (in your car): It takes approx. 1 minute to update.
      • Park your car on the safe place and start the engine to avoid the voltage drop of the power line.
    3. Connect the USB memory to the main unit and confirm that USB NO MUSIC is displayed on the main unit.
    4. Press and hold SOURCE button for 1 second on the main unit to turn the source off and display the clock.
    5. Press MENU button.
    6. Turn the control dial to display SET GENERAL, and press the control dial.
    7. Turn the control dial to display SET AUTO OFF, and press the control dial.
    8. Make sure to turn the control dial to display SET A.OFF xx, and set this setting to NO.
      (Please confirm the display, SET A.OFF NO.) Then, press the control dial.
    9. Turn the control dial to display SET FIRMWARE, and press the control dial
    10. Turn the control dial to display FW UPDATE, and press the control dial.
    11. Turn the control dial to display FW UPDATE-YES, and press the control dial.
      Update starts with CHECKING displayed. Update should finish in approximately 1 minutes and when the Update is normally finished, the unit restart automatically from source OFF state (Clock is displayed.)
    12. Confirm that the firmware version is updated by referring to How to confirm the firmware version on the main unit.
    13. When 12 is displayed for the version number, updating of the firmware is completed
    14. If AUTO OFF setting is used before updating the firmware, please set the AUTO OFF setting again.