NWZ-W274S Firmware Update version 1.01 (Apple Macintosh)
適用型號
- NWZ-W274S
關於此下載
For owners of Walkman W series, we offer NWZ-W274S firmware update program to the latest version 1.01. Please read carefully the following instructions.
Note: This update utility is not necessary if your Walkman has already been updated to firmware version 1.01 by the automatic firmware update function.
Contents of the update
Improvement of the issue where the WALKMAN may not properly start up or play back.
Applicable Models
NWZ-W274S that has firmware version lower than 1.01.
How to confirm the Model and the Firmware version
- Please confirm the Model and the Firmware version from the steps below.
- Connect the Walkman to your computer by using the USB cradle (supplied).
- On your computer, check “information.txt” in the WALKMAN folder.
- The “information.txt” contains the following information:
01: Model name
02: Memory capacity
03: Firmware version - Confirm the Model and the Firmware version.
Target PC environments
* OS
- Mac OS X v10.6 or later
Not supported by OSs other than above.
Hardware requirements
- CPU: 1 GHz or higher
- Memory: 1 GB or more (32-bit OS) / 2 GB or more (64-bit OS)
檔案資訊
檔案名稱
- NWZ-W274S_V1_01.dmg
檔案版本
- 1.01
檔案大小
- 17.5MB
日期
- 2014-04-15
系統需求
- Mac OS
- OS X
安裝
詳細資訊
Update procedure
- The update program download is started by clicking “Download” button on the bottom of this announcement.
- After completion of the download, connect your Walkman to your PC by USB cradle (supplied).
- Quit all software running on your PC.
- Double click the saved file, and work by following displayed massages.
* Please do not disconnect the unit from the PC during upgrading. - When the message of completing upgrading is displayed, click Finish button.
After update
Please confirm the version when the update program is installed successfully with following How to confirm the Model and the Firmware version steps.
The update program installation is succeeded when Firmware version is shown 1.01.
