適用機型

本資訊僅適用於下列機型:

  • PMW-F5

NEW FEATURES & IMPROVEMENTS
1.) Compatible with the Picture Cache function
2.) Compatible with the User Menu
3.) Compatible with the sub display menu
4.) Compatible with the marker color setting
5.) The auto iris level indication is added
6.) Compatible with the video bandwidth selection for the
7.) HD/2K video output
8.) Compatible with User 3D LUT
9.) The Gamma option is added
10.) The Color Space option is added
11.) The Lens RET button can be used for the assignable button
12.) Optional accessory is added
   
For further details, please refer to the Release Notes.
 

LIMITATIONS
 
1.) Interval recording function
You can see “Interval Rec” on recording menu page, but V4.0 firmware doesn’t support Interval Recording function yet. We will release V4.1 firmware which supports Interval recording function in end of May.
 
2.) Assignable button of Marker
When you assign Marker On/Off as an Assignable button, Marker on VF and SDI Out setting changes in the following order:
 
 •  Button press #1:  VF = ON,    SDI = OFF,  Message = Marker ON
 •  Button press #2:  VF = OFF,  SDI = ON,    Message = Marker ON
 •  Button press #3:  VF = OFF,  SDI = OFF,  Message = Marker OFF
 •  Button press #4:  VF = ON,    SDI = ON,    Message = Marker ON 
   
3.) iOS setting for WiFi Remote
While using WiFi Remote by iOS devices and Safari, please turn off Private browse function.
   
4.) Zoom, Focus and Shutter control
The camera can be controlled from a RM-B170 remote controller via the demand converter box CBK-DCB01. To enable the CBK-DCB01 to control the Zoom and Focus ring of the lenses and to pass the new shutter controls from the RM-B170 to the camera, the CBK-DCB01 firmware must be upgraded to V1.10.
 

CAUTION
 
 •  DVF-EL100/L700 viewfinders with V1.1 are NOT compatible with PMW-F5/F55 camcorders with V1.22 or earlier.
If a DVF-EL100/L700 with V1.1 is connected to PMW-F5/F55 with an earlier version than V2.00, no picture will be visible.
 

 •  If you are upgrading from V1.22 or lower, you need to update to V2.00 first and you are strongly recommended to perform ‘All Reset’ in the System menu after installing this software to avoid potential instability. To retain your original menu settings before upgrading save the settings to SD Card using the ‘All File’ option in the File menu. They can then be restored later using the same ‘All File’.
 
 • This s/w is only compatible with AXS-R5 Binary Package V4.00. For full compatibility, it is recommended the AXS-512S24 media is upgraded to V1.20.